Menu Close

Updated: 8 Nov 2024

SOLD

Antique Japanese Sword Wakizashi Signed by Omi Daijo Fujiwara Tadahiro
NBTHK Tokubetsu Hozon Certificate

$8,807.04

DELIVERY TIME : Approx. 1-1.5 months
*We ship from Tokyo, Japan. There might be delay in shipment depending on countries.

SHIPPING TO :
USA, Canada, Mexico, Germany , Belgium, France, Finland, Hong Kong, Australia
*Please contact us prior to purchase if your country isn’t listed.

INCLUDED : NBTHK Tokubetsu Hozon Certificate , NBTHK Tokubetsu Hozon Certificate for the Menuki, NBTHK Hozon Certificate for the Kozuka, Shirasaya Case, Koshirae Case,  Traditional Sword Carrying Case, Sword Maintenance Kit, Full Exportation Support

Category Wakizashi (SHINTO)
Age Early Edo Period (1641-1688)
Swordsmith Hizen Koku Jyu Omi no Daijyo Fujiwara Tadahiro
(肥前国住近江大掾藤原忠広)
Certificate NBTHK Tokubetsu Hozon Certificate
Location Hizen province (Today’s Saga prefecture)
Blade Size Cutting Edge Length: 50.0 cm (19.7 inches)
Curvature: 1.6 cm (0.63 inches) 

More photos& videos available on request. Please feel free to contact us. 

SOLD

Antique Japanese Sword Wakizashi Signed by Omi Daijo Fujiwara Tadahiro with NBTHK Tokubestsu Hozon Certificate

【Description】

Hizen Koku Jyu Omi Daijyo Fujiwara Tadahiro

 This blade was signed by Hizen Koku Jyu Omi no Daijyo Fujiwara Tadahiro(肥前国住近江大掾藤原忠広) , who is the first son of the first-gen Tadayoshi. It is said that Tadahiro was active in sword-forging during 1624-1688 (Early Edo Period).

 Tadayoshi(Father) is one of the most famous swordsmiths in the early Edo period and made Hizen province(today’s Saga prefecture) a prominent sword-forging place back then. Tadahiro learned sword-forging techniques under his father’s supervision until Tadayoshi died in 1632 (9th year of the Kan-Ei era).

 Tadahiro took over the school his father ran when he was only 19 years old, and he started to make a sword in the same year. This fact indicates that he was excellent at making swords, and the apprentices of his father(Tadayoshi) supported him to run the school. Tadahiro received the title of Omi Daijyo in 1641 (the sixth year of the Genroku era). He kept forging swords for almost 60 years for the Nabeshima clan, strong feudal lords.

 Tadahiro died at the age of 81 in 1693 and left a large number of excellent swords before his decease. He had many famous apprentices, such as the third-gen Mutsu Daijyo Tadayoshi, Harima Daijyo Tadakuni, and Kawachi Daijyo Masahiro.

 Fujiwara Tadahiro and other swordsmiths in the Hizen province worked under the auspices of Nabeshima clan. The swordsmiths in Hizen province were able to produce beautiful Jigane-patterned blades, also known as Hizen To, using and mixing carbon steel made in Netherland.

 Most of Tadahiro’s work has Hamon types of Suguha and Chojimidare. This blade has Chojimidare Hamon, and you can see beautiful Jigane, which is famous for blades made in Hizen province. Swords forged by Tadahiro are also famous among Japanese sword collectors because of his exquisite craftsmanship and history.

The first-gen Tadayoshi (His father)

 The first-gen Tadayoshi was born and raised in the Saga domain. In 1596, under the domain’s order, he went to Kyoto to learn the sword-forging technique from Umetada Myojyu(埋忠明寿), one of the greatest swordsmiths in the early Edo period. He improved his craftsmanship and returned to the Saga domain two years later (1598). The first head of the Nabeshima clan, Nabeshima Katsushige, appreciated the work of the first-gen Tadayoshi very much. Then, Katsushige appointed him as his Okakaekaji, a swordsmith who exclusively forged swords for a specific domain or clan. And Tadayoshi started to stay near Saga castle, which is the headquarter of the Nabeshima clan. And, he founded Hizen Tadayoshi school, which trained more than 100 swordsmiths during the Edo period.  Tadahiro is one of them.

 

 This blade is appraised as a Tokubetsu Hozon Token(特別保存刀剣) issued by NBTHK(Nihon Bijutsu Touken Hozon Kyokai:日本美術刀剣保存協会). This authentication paper was only given to authentic Japanese swords, especially well preserved and high quality with artistic value. 

 

【Blade】
Cutting Edge Length(Nagasa)50.0 cm (19.7 inches)
Curvature(Sori)1.6 cm (0.63 inches) 


 

Hamon
The crystalline structure which forms along the cutting edge of a blade as a result of the hardening process
Jimon(Jihada)
visible steel surface pattern created by folding and hammering during forging process



 

NakagoNakago is the tang of the Japanese sword.

Japanese swordsmiths left the black rust on the tang because it prevents red rust while the tang is in its handle. And the discoloration of the tang was created over time, and it is a great indicator for a Japanese sword specialist to estimate when the sword was forged.

Koshirae: Koshirae is the mounting of the Japanese sword. There are several parts that consist of Koshirae such as Saya(Scabbard), Tsuka( Handle), Tsuba(Handguard).

 

Fuchi-KashiraA pair of matching sword fittings that cover the upper and bottom parts of its sword hilt.

 A kind of plant is the motif of this Fuchi Kashira. Plants whose buds have unraveled and are about to bloom are engraved on each Fuchi and Kashira parts. We estimate that its appearance resembles the Keshi (ケシ, poppy) flower. This flower has the meaning of welcoming a child or wishing for the birth of a child.

 If you focus on the side of this Fuchi Kashira, you will find the Mei (銘銘, engraved inscription). According to this signature, this work was made by Yasuchika (安親). Please note that there is no proof of this Mei. We would like to mention it just as a possibility. Tsuchiya Yasuchika (土屋 安親, 1670-1744) played an active part in the middle of the Edo period. The Shounai (庄内) school became well-known thanks to this famous metalworker. Shounai is the castle town of the Sakai (堺) family and is located in today’s Tsuruoka (鶴岡) City in Yamagata (山形) prefecture. In this area, many metalworkers did well.


Tsuka and MenukiTsuka is the handle of the Japanese sword and Menuki is its decoration.

 This Menuki was appraised as a Tokubetsu Hozon Tousogu on January 19th in the 29th year of the Heisei era (2017). According to the certificate, this Menuki’s motif is the Kouhone (河骨) flower. 河 means river, and 骨 means bone in Japanese. This plant was given this name because its rhizomes are white and lumpy, giving it the appearance of white bones. This plant design has been used as family crests. A theory says that in the Edo period, the use of Aoi Mon (葵紋) as the family crest of the Shogun family was restricted. It is thought that the use of Kouhone Mon (河骨紋) increased because it resembles the Aoi crest. Since the Kouhone crest was not used before the Edo period, it is said that in contrast to the Aoi crest of the Tokugawa (徳川) family, ordinary people used the Kouhone crests, “trying to gain authority from the shogunate,” or “out of reservations towards the shogun family.”

 Another piece of information from the certificate is that this Menuki was attributed to the Gotou (後藤)-style metalwork. The first Gotou family was Gotou Yujō (後藤祐乗), he worked for Ashikaga Yoshimasa (足利義政, the 8th Shogun of the Muromachi government). For generations, the Gotou family has created high-quality metalworks in a sophisticated style that expresses the Samurai family’s formality.

Tsuba and HabakiTsuba is the handguard for the Japanese Sword and Habaki is the equipment to make the blade not touch its scabbard inside. It prevents the blade from getting rusty and chipped. 

 This Tsuba depicts the scene at a moonlit night. The same as the Menuki, we believe the plants designed on this Tsuba are the Kouhones. The flowers are painted with gold, and the moon is colored silver.

 If you focus on the center part of this Tsuba, you will find the Mei (銘, engraved inscription). It is written as follows: 濱埜 保随 (Hamano Yasuyuki). Please note that there is no proof of this signature. Yasuyuki leaned under 濱野 直随 (Hamano Naoyuki). The founder of the Hamano (浜野) school was 濱野 政随 (Hamano Shouzui). He was the student of 奈良 利寿 (Nara Toshinaga), who was the Nara Sansaku (奈良三作, the most notable three metalworkers in the Nara school).

KozukaKozuka is a small knife stored in Kozuka Hitsu(groove of the sheath of the Japanese sword).

 This Kozuka Hitsu was appraised as a Hozon Tousogu on Feb 24th in the 29th year of the Heisei era (2017). A Kogatana (小刀, small knife) is stored in the Kozuka. The surface of this Kozuka is decorated with the Nanako-Ji (魚子地) technique. This process makes a uniform minimal protrusions pattern by hitting the Nanako-Ji Tagane (魚子地鏨, a chisel for this technique) on a metal surface. This decorative technique is often seen on sword mountings.

 

Saya Saya is the scabbard for the Japanese sword.  

 

Authentication PaperNBTHK Tokubetsu Hozon Certificate for the blade (No. 146035)

 NBTHK, also known as Nihon Bijutsu Touken Hozon Kyokai (the Society for the Preservation of the Japan Art Sword), is one of the oldest Japanese sword appraising organizations in modern-day Japan. They authenticated the blade on Dec 27th in the 12th year of Heisei (2000). They appraised it as Tokubetsu Hozon Touken, the blade especially worth preserving for Japanese society. The purchaser will receive this original certificate as well. We can also translate what is written into English and make a PDF file for your record if you request.

Registration Number :  Gunma 46491
 The Board of Education in Gunma prefecture issued a registration paper for this sword. It is called Jyu Token Rui Torokusho(銃刀剣類登録証). Bunkacho(The Agency for Cultural Affairs) acknowledges a Japanese sword with this paper as a work of art.
The sword needs to be traditionally hand-forged and made of Tamahagane carbon steel to be registered in the system. With this paper, its owner in Japan can legally own an authentic Japanese sword. Based on this registration number, we will apply for its export permit.
This paper will need to be returned to the board of education when the sword is being shipped abroad, but you can receive a copy of it. An English translation of this registration paper is available on request.


—————————————————————–

【About us】
 Samurai Museum is located in Tokyo, Japan, exhibiting antique artifacts related to the Samurai history. Samurai Museum Shop is the place for those who are interested in Japanese culture and craftsmanship. We deal with antique Samurai swords/armor, traditional crafts made in Japan and so on.

Japanese Sword& Export Process
 The Japanese swords we deal with are hand-forged edged swords made in Japan. It was made from the traditional carbon steel called TAMAHAGANE(玉鋼). Samurai Museum is familiar with the proper legal procedure for an antique/ authentic Japanese sword to be exported from Japan. We have sent more than 700 Japanese swords for the past few years (~2024) to amazing owners who appreciate its historical value.

 Each Japanese sword is registered under the Agency for Cultural Affairs and the Board of Education in Japan. They issue a registration paper for each Japanese sword for its owner in Japan to legally possess it. The Japanese sword with its registration paper means it was traditionally hand-forged in Japan.

 To legally export the sword from Japan to other countries, we will have to apply for its permit to the Agency for Cultural Affairs(Bunkacho) and return the original registration paper to the Board of Education. It normally takes around 2-4 weeks to receive this permit after submitting required documents. And we would like you to expect at least 1-1.5 months for your order to arrive at your given address after you ordered. For more detailed info, please click here.

 It is allowed for residents in Japan to own authentic Japanese swords without a special license as long as they come with registration papers. Please feel free to contact us if you are a resident of Japan, whether temporarily or permanently. We will also assist you when you leave Japan and need to obtain the export permit.

【Payment Method】
We accept payment through Stripe (Credit card), PayPal, Apple Pay or ChromePay, all of which are secure payment methods. Also, you don’t need to make an account on Stripe for the checkout. If you prefer other payment method, please contact us. After confirming your payment, we will apply for an export permit. You may either pay in JPY, USD, AUD, CAD,EUR CHF or GBP. The price is set in Japanese Yen. Prices in other currencies are automatically calculated based on the latest exchange rate. 

* If the amount is above 1 million JPY, Stripe or wire transfer will be the only options for payment.

【Shipping】
 We have shipped authentic Japanese swords to the USA, Canada, Mexico, Germany , Belgium, France, Finland, Hong Kong, Australia. If you don’t live in these countries and like to order, please contact us first before making a purchase. We offer Free International Shipping as long as we can send antique Japanese swords by EMS. 

 We normally ship by EMS(Express Mail Service) provided by Japan Post. We will send you a tracking number for your order as soon as we hand it to the post office. We will put 100 % insurance on the shipping document without any extra charge. Based on the total amount, there might be a duty tax or other fee for you to pay, depending on the countries. We use package cushioning to protect the item and put it in a PVC pipe, which is one of the most secure packages because of its durability.

 It will normally takes 5-14 days for the item to arrive at your given address after we dispatch it. Time of delivery is estimated as accurately as possible by the carrier but does not take into account any delays beyond our control such as by inclement weather, post office holiday seasons.

* If you live in Australia and like to purchase an authentic Japanese sword, please click here to know the detail.

* If you live in the UK and like to purchase an authentic Japanese sword, please contact us first and click here to know the detail.

【Review】
 Here is one of the reviews we received from a customer who purchased an authentic Japanese sword from us. For more reviews, please click here.
“My experience overall with the whole process was wonderful. I had many questions about the history and process to purchase these treasures. All my questions were answered very timely and complete. The staff is very knowledgeable and very well versed if any questions do arise.”

【How to make sure the condition】
 Please keep in mind that what you are going to purchase is an antique item. We uploaded high resolution photos for you to check its condition thoroughly. If you like to see more photos with different angles, please feel free to contact us. We will be happy to send them to you so that you can make informed decision. It is essential for us to know that you are happy with your choice of a sword. and we are prepared to use the best of our ability to serve you.

【How To Contact Us】
 Please contact us through email, Facebook Messenger or Live Chat if you have any questions. You can find each icon on the right side of the website. Please click one of them to reach us. We will reply to you within 1-2 business days.

The Art of Nihonto (Japanese Sword)
 Samurai’s history is a profound, eloquent legacy of ancient Japanese warriors in which millions of people worldwide are being fascinated. If you like to find out the art of Nihonto, please click here.

A Guide to Japanese Sword Maintenance
 After acquiring an genuine Japanese sword, it is also important to know how to take good care of it. Here is the special video for you. Mr. Paul Martin, Japanese sword expert, shows you how to give proper maintenance to your sword. By mastering how to clean the Japanese sword, its aesthetic beauty will last forever.

 When you purchase a Japanese sword from us, you can get a Free Japanese sword maintenance kit. It comes with four tools(Choji Oil, Uchiko Whetstone Powder, Peg remover, Oil Applicator). By watching the video instruction above , you can enjoy learning how to maintain your Japanese sword while appreciating it. If  you have any difficulty assembling the sword or cleaning the blade, you can feel free to contact us.

 

MORE ANTIQUE JAPANESE SWORD FOR SALE

SWORDS WITHOUT CERTIFICATES FOR SALE

READ KATANA ARCHIVE ARTICLE(Episode1-8)

LEARN JAPANESE SWORD TERMINOLOGY

 

 Thank you for reading all the information on the page. If you have any difficulty choosing the right Japanese sword for you, we will be more than happy to help you find the one that speaks to you the most. Please feel free to contact us.

SOLD

You may also like…

  • $4,566.61

    DELIVERY TIME : Approx. 1-1.5 months
    *We ship from Tokyo, Japan. There might be delay in shipment depending on countries.

    SHIPPING TO :
    USA, UK, Canada, Mexico, Switzerland, Germany , Hong Kong, France, Australia
    *Please contact us prior to purchase if your country isn’t listed.

    INCLUDED : NBTHK Hozon Certificate , Koshirae Case, Shirasaya Case, Traditional Sword Carrying Case, Sword Maintenance Kit, Full Exportation Support

    Category Katana (KOTO)
    Age Mid-Late Muromachi period (approx. 500 years old)
    Swordsmith Attributed to Sakakura Seki (坂倉関: Unsigned)
    Certificate NBTHK Hozon Certificate
    Location Owari  (today’s Aichi prefecture) 
    Blade Size Cutting Edge Length: 70.2 cm ( 27.6inches)
    Curvature: 1.4 cm ( 0.55 inches)

    Thank you for visiting our website. This sword was sold as each antique Japanese sword is one of a kind. However, we might be able to show you something similar because we have various types of swords available. Also, there are ones that aren’t listed on the website yet. Our customer service will help you find your ideal blade you will cherish for generations. Please feel free to contact us or check the list of swords. We will be more than happy to help you.

  • $4,240.43

    DELIVERY TIME : Approx. 1-1.5 months
    *We ship from Tokyo, Japan. There might be delay in shipment depending on countries.

    SHIPPING TO :
    USA, UK, Canada, Mexico, Switzerland, Germany , Hong Kong, France, Australia
    *Please contact us prior to purchase if your country isn’t listed.

    INCLUDED : NBTHK Tokubetsu Hozon Certificate, Shirasaya Case, Traditional Sword Carrying Case, Sword Maintenance Kit, Full Exportation Support

    Category Wakizashi (KOTO)
    Age Late Muromachi Period
    Swordsmith Fuyuhiro (冬廣)
    Certificate NBTHK Tokubetsu Hozon Certificate
    Location Sagami or Wakasu province
    Blade Size Cutting Edge Length: 33.7 cm ( 13.26 inches)
    Curvature: 0.3 cm (0.12 inches)

    Thank you for visiting our website. This sword was sold as each antique Japanese sword is one of a kind. However, we might be able to show you something similar because we have various types of swords available. Also, there are ones that aren’t listed on the website yet. Our customer service will help you find your ideal blade you will cherish for generations. Please feel free to contact us or check the list of swords. We will be more than happy to help you.

  • $4,109.95

    DELIVERY TIME : Approx. 1-1.5 months
    *We ship from Tokyo, Japan. There might be delay in shipment depending on countries.

    SHIPPING TO :
    USA, UK, Canada, Mexico, Switzerland, Germany , Hong Kong, France, Australia
    *Please contact us prior to purchase if your country isn’t listed.

    INCLUDED : NBTHK Tokubetsu Hozon Certificate , Shirasaya Case, Koshirae Case, Traditional Sword Carrying Case, Sword Maintenance Kit, Full Exportation Support

    Category Wakizashi (SHINTO)
    Age Kan-Ei era: 1624-1644
    Swordsmith Echizen no Kami Fujiwara Kunitsugu (越前守藤原国次)
    Certificate NBTHK Tokubetsu Hozon Certificate
    Location Yamashiro  (Today’s Kyoto)
    Blade Size Cutting Edge Length : 46.8  cm (  18.4 inches)
    Curvature: 1.0 cm ( 0.39 inches) 

    Thank you for visiting our website. This sword was sold as each antique Japanese sword is one of a kind. However, we might be able to show you something similar because we have various types of swords available. Also, there are ones that aren’t listed on the website yet. Our customer service will help you find your ideal blade you will cherish for generations. Please feel free to contact us or check the list of swords. We will be more than happy to help you.